Our Publications

  • Mantesh C. Choukimath, N. R. Banapurmath, M. A. Umarfarooq, Mechanical, fracture and thermal characterization of post-cured hybrid epoxy nanocomposites reinforced with Graphene nanoplatelets and h-Boron Nitride, Frattura ed Integrità Strutturale, 71 (2025) 22-36; DOI: 10.3221/IGF-ESIS.71.03.
  • G. B. Hiremath, N. R. Banapurmath, Ashok M. Sajjan, N. H. Ayachit & N. M. Badiger, Potentiality of Nano Pb2O3–Enhanced Cement as a Nuclear Radiation Shield for Radiation Therapy Facilities, Nuclear Technology, Taylor and Franscis Publication, 2024, https://doi.org/10.1080/00295450.2024.2411491.
  • Dhanaraju G., Pittala R.K., Ben B.S., Ben B.A., Atgur V., Banapurmath N.R., Badruddin I.A., Kamangar S., Amine functionalized maleimide grafted MWCNT–CFRP hybrid composites interfacial/matrix healing and mechanical performance through thermally reversible cycloaddition, (2024) Polymer Composites.
  • Dileep K., Srinath A., Banapurmath N.R., Umarfarooq M.A., Sajjan A.M., Impact of hybrid nanoparticle reinforcements on mechanical properties of epoxy-polylactic acid (Pla) composites, (2024) Frattura ed Integrita Strutturale, 18 (70), pp. 91 - 104,
  • Dhanaraju G., Pittala R.K., Ben B.S., Atgur V., Banapurmath N.R., Umarfarooq M.A., Khan T., Singh B., Enhanced mechanical performance and damping behavior of CFRP composites through exfoliated MWCNT functionalization, (2024) Nanocomposites, 10 (1), pp. 197 – 213.
  • Mysore T.H., Y. Patil A., Banapurmath N.R., Hegde C., Kumar R., Yunus Khan T.M., Feasibility study of scapula bone as a next-generation material for biomedical applications, (2024) Journal of Applied Animal Research, 52 (1), art. no. 2337174.
  • Kotabagi S.D., Minagalavar R.L., S.K R., Rathod M.R., Sajjan A.M., “Evaluation of surface interaction of plant root extract components on mild steel surface in HCl medium: Electrochemical, and surface characterization approaches”, (2024) Results in Surfaces and Interfaces, 16, art. no. 100275.
  • Minagalavar R.L., Rajappa S.K., Rathod M.R., Sajjan A.M., Ferrous metal corrosion studies in presence of eco-friendly acacia melanoxylon leaves extract in 1M HCl condition, (2024) Inorganic Chemistry Communications, 160, art. no. 111900.
  • Minagalavar R.L., Rajappa S.K., Rathod M.R., Sajjan A.M., Corrosion mitigation of (E)-N-benzylidene-4-nitrobenzenamine on mild steel in acidic medium: Experimental and Theoretical Analysis, (2024) Chemical Data Collections, 51, art. no. 101143.
  • Kotabagi S.D., Minagalavar R.L., Rajappa S.K., Rathod M.R., Sajjan A.M., Suma J.G., Surface interaction of expired Brilcure (Ticagrelor) drug on soft-cast steel in 0.5 M H2SO4 medium: Corrosion protection, surface characterizations and computational studies, (2024) Journal of the Taiwan Institute of Chemical Engineers, 165, art. no. 105791.
  • Minagalavar R.L., Rathod M.R., Rajappa S.K., Sajjan A.M., Experimental and Theoretical Investigations of Cordia Obliqua Leaves Extract as an Environmentally Benign Inhibitor for Mild Steel Corrosion in a 1 M HCl Solution, (2024) Portugaliae Electrochimica Acta, 42 (4), pp. 233 – 254.
  • Uppin V.S., Gouda P.S.S., Sridhar I., Umarfarooq M.A., Edacherian A., Interleaving carbon-glass veils in glass epoxy composite for enhanced fracture toughness and interlaminar shear strength—A hybrid approach, (2024) Polymer Composites, 45 (12), pp. 10654 – 10665.
  • Uppin V.S., Shivakumar Gouda P.S., Sridhar I., Umarfarooq M.A., Edacherian A., Effects of carbon/glass nonwoven interleaving veils and their areal density on opening and shearing mode interlaminar fracture toughness of glass epoxy composites, (2024) Theoretical and Applied Fracture Mechanics, 130, art. no. 104292.
  • Sheit H.M.K., Kani S.M., Sathiq M.A., Abuthahir S.S.S., Subhapriya P., Nivedhitha K.S., Umarfarooq M.A., Badruddin I.A., Kamangar S., Shaik A.S., Experimental Studies on the Effect of Expired Amiodarone Drug (EAD) as a Corrosion Inhibitor on Mild Steel in 1 M HCl, (2024) Materials, 17 (3), art. no. 751.
  • Uppin V.S., Shivakumar Gouda P.S., Sridhar I., Muddebihal A., Umarfarooq M.A., Edacherian A., Interleaving Carbon-Glass veil in glass epoxy composite for improved mode-I fracture toughness– A hybrid approach, (2024) Frattura ed Integrita Strutturale, 18 (68), pp. 127 – 139.
  • Dhanaraju G., Pittala R.K., Ben B.S., Atgur V., Banapurmath N.R., Umarfarooq M.A., Khan T., Singh B., Enhanced mechanical performance and damping behavior of CFRP composites through exfoliated MWCNT functionalization, (2024) Nanocomposites, 10 (1), pp. 197 – 213.
  • Dileep, K., Srinath, A., Banapurmath, N.R., Umarfarooq, M.A., Sajjan, A.M. Mechanical and Fracture Characterization of Epoxy/PLA/Graphene/SiO2 Composites, April 2023, Frattura ed Integrita Strutturale, 17 (64), pp. 229-239.
  • Naresh H., Prashantha S., N.R. Banapurmath, M.A. Umarfarooq, Chandramouli Vadlamudi and Sanjay Krishnappa, Mechanical, fatigue, and superplasticity properties of Cu-Al-Mn, Cu-Al-Be-Mn shape memory alloy and their metal matrix composites, Mechanical, fatigue, and superplasticity properties of Cu-Al-Mn, Cu-Al-Be-Mn shape memory alloy and their metal matrix composites, AIMS Materials Science, AIMS Materials Science, 11(1): 129–149, DOI: 10.3934/matersci.2024008.
  • Al-Zahrani, S.A., Patil, M.B., Mathad, S.N., Patil, A.Y., Otaibi, A.A., Masood, N., Mansour, D., Khan, A., Manikandan, A., Syafri, E. Photocatalytic Degradation of Textile Orange 16 Reactive Dye by ZnO Nanoparticles Synthesized via Green Route Using Punica Granatum Leaf Extract, January 2023 Crystals, 13 (2), art. no. 172.
  • Vijayakumar Nimbagal, N. R. Banapurmath, M. A. Umarfarooq, Suraj Revankar Ashok M. Sajjan, Manzoore Elahi M. Soudagar, Kiran Shahapurkar, Mohammed A. Alamir, Ibrahim M. Alarifi, Ashraf Elfasakhany, Mechanical and fracture properties of carbon nano fibers/short carbon fiber epoxy composites, Polymer Composites, Wiley Publication, 2023;1–13.
  • M. A. Umarfarooq, P S Shivakumar Gouda, N R Banapurmath, M.I. Kittur, Tabrej khan, Bisma Parveez, Tamer A. Sebaey, Irfan Anjum Badruddin, Post-curing and Fiber Hybridization Effects on Mode-II Interlaminar Fracture Toughness of Glass/Carbon/Epoxy Composites, Polymer Composites, Wiley Publication, 22 May 2023.
  • Revati Dharampal Sagare, Fatima Sanjeri Dasankoppa, Hasanpasha N. Sholapur, N.R. Banapurmath, M.A. Umarfarooq, Doped halloysite nanotubes as a nanocontainer for the fabrication of ciprofloxacin hydrochloride loaded 3D printed scaffolds, Journal of Drug Delivery Science and Technology, Volume 86, September 2023, 104637.
  • Khan, Tabrej, Alshahrani, Hassan, Abd-Elaziem, Walaa, Umarfarooq M.A. Sebaey, Tamer A. Quasi-static axial crushing of multi-tubular foam-filled carbon fiber reinforced composite structures, Polymer Composites, Volume 44, Issue 11, Pages 7843 – 7854, November 2023.
  • Minagalavar, Ragini L., Rajappa S.K., Rathod, Manohar R. Sajjan, Ashok M., Investigation of corrosion inhibition performance of expired fluconazole drug on mild steel in 0.5M H2SO4 medium, Journal of Molecular LiquidsVolume 3911, December 2023, Article number 123291.
  • Minagalavar, Ragini L., Rathod, Manohar R. Sajjan, Ashok M., Investigation of Laurus Tamala leaves extract as an environmentally acceptable corrosion inhibitor for soft steel in 1M HCl: Electrochemical, DFT, and surface characterization techniques, Indian Journal of Chemical Technology, Volume 30, Issue 4, Pages 492 – 5052023.
  • Dharmdas A., Patil A.Y., Baig A., Hosmani O.Z., Mathad S.N., Patil M.B., Kumar R., Kotturshettar B.B., Fattah I.M.R., An Experimental and Simulation Study of the Active Camber Morphing Concept on Airfoils Using Bio-Inspired Structures, (2023) Biomimetics, 8 (2).
  • Dhaduti S.C., Sarganachari S.G., Patil A.Y., Budapanahalli S.H., Kumar R., Asymmetric/Symmetric Glass-Fibre-Filled Polyamide 66 Gears—A Systematic Fatigue Life Study, (2023) Journal of Composites Science, 7 (9), art. no. 345
  • Al-Zahrani S.A., Patil M.B., Mathad S.N., Patil A.Y., Otaibi A.A., Masood N., Mansour D., Khan A., Manikandan A., Syafri E., Photocatalytic Degradation of Textile Orange 16 Reactive Dye by ZnO Nanoparticles Synthesized via Green Route Using Punica Granatum Leaf Extract, (2023) Crystals, 13 (2), art. no. 172.
  • Al-Zahrani S.A., Patil M.B., Mathad S.N., Patil A.Y., Al Otaibi A., Masood N., Mansour D., Khan A., Gupta V., Topare N.S., Somya A., Ayyar M., Photocatalytic Azo Dye Degradation Using Graphite Carbon Nitride Photocatalyst and UV-A Irradiation, (2023) Crystals, 13 (4), art. no. 577.
  • Budapanahalli S.H., Mallur S.B., Patil A.Y., Kumar R., Optimization Study On Wear Behaviour Of Aluminium 7075 Hybrid Composite Containing Silicon Carbide And Aluminium Oxide Using Taguchi Method, (2023) Acta Periodica Technologica, (54), pp. 129 – 136
  • Mahale R.S., Kanaginahal G.M., Vasanth S., Tiwary V.K., Shashanka R., Sharath P.C., Patil A., Applications of fused deposition modeling in dentistry, (2023) Development, Properties, and Industrial Applications of 3D Printed Polymer Composites, pp. 211 – 219.
  • Kanaginahal G.M., Tambrallimath V., Murthy M., Mahale R.S., Patil A., Pawar S.Y., Kakkamari P.P., Flammability Studies of Natural Fiber-Reinforced Polymer Composites fabricated by Additive Manufacturing Technology: A Review, (2023) Journal of The Institution of Engineers (India): Series D
  • Tabrej Khan, Hassan Alshahrani, Walaa Abd‐Elaziem, MA Umarfarooq, Tamer A Sebaey, Quasi-static axial crushing of multi‐tubular foam‐filled carbon fiber reinforced composite structures, Polymer Composites, Volume 44, Issue11, November 2023, Pages 7843-7854.
  • Anant Joshi, S Gouda, I Sridhar, MA Umar Farooq, BH Maruthi Prashanth, Influence of matrix modification on interlaminar fracture toughness of glass epoxy laminates using nano and micro fillers, Frattura ed Integrità Strutturale, 65 (July 2023) 59-73.
  • Anant Joshi, Shivakumar Gouda, I Sridhar, MA Umar Farooq, Vinayak Uppin, BH Maruthi Prashanth, Matrix hybridization effects on interlaminar fracture toughness of glass epoxy laminates using nano and micro fillers, Frattura Ed Integrità Strutturale, (Jun 22, 2023),17(65), 59–73.
  • Roopa A.K., Hunashyal A.M. & Mysore, Rahila Rehamani M., Correction: Development and Implementation of Cement-Based Nanocomposite Sensors for Structural Health Monitoring Applications: Laboratory Investigations and Way Forward, Sustainability (Switzerland), Volume 15, Issue 1, 1June 2023, Article number 8932
  • Shetty, Hitha D., Ashok Reddy G.V., Ramasamy Venkatesh, Kaliprasad C.S., Daruka Prasad B., Yogananda H.S., Naik, Ramachandra, Prasad V., Koyyada Ganeshh, Anil Kumar Yedlurii, Electrical conductivity and electromagnetic interference shielding effectiveness of elastomer composites: Comparative study with various filler systems, Inorganic Chemistry Communications,Volume 15, 1May 2023,  Article number 110578.
  • Shankar A. Hallad, Nagaraj R. Banapurmath, Avinash S. Bhadrakali, Arun Y. Patil Anand M. Hunashyal, Sharanabasava V. Ganachari, Tatagar M. Yunus Khan, Irfan Anjum Badruddin, Manzoore Elahi M. Soudagar and Sarfaraz Kamangar, Nanoceramic Composites for Nuclear Radiation Attenuation, Materials, MDPI Publication, Open Access, Volume 15, Issue 262, 2022.
  • Patil, A., Banapurmath, N.R., Hunashyal, A.M., Meti, V.K.V., Mahale, R.S., Development and performance analysis of novel cast aa7076-graphene amine-carbon fiber hybrid nanocomposites for structural applications, Biointerface Research in Applied Chemistry, 2022, 12(2), pp. 1480–1489.
  • Shilar, F.A., Ganachari, S.V., Patil, V.B., Investigation of the effect of granite waste powder as a binder for different molarity of geopolymer concrete on fresh and mechanical properties, Materials, 2022, 309, 131302.
  • Fatheali A. Shilar, Sharanabasava V. Ganachari, Veerabhadragouda B. Patil, Kottakkaran Sooppy Nisar, Abdel-Haleem Abdel-Aty, I. S. Yahia, Evaluation of the Effect of Granite Waste Powder by Varying the Molarity of Activator on the Mechanical Properties of Ground Granulated Blast-Furnace Slag-Based Geopolymer Concrete, Polymers, 2022, 14(2), 306;
  • Adarsh Patil, Nagaraj R. Banapurmath, Anand M. Hunashyal, Vinod Kumar V. Meti, Rayappa Shrinivas Mahale, Development and Performance analysis of Novel Cast AA7076-Graphene Amine-Carbon Fiber Hybrid Nanocomposites for Structural Applications, Biointerface Research in Applied Chemistry, Volume 12, Issue 2, 2022, 1480 – 1489.
  • Shankar A Hallad, Sharanabasava V Ganachari, Manzoore Elahi M Soudagar, NR Banapurmath, Anand M Hunashyal, Islam MR Fattah, Fayaz Hussain, Muhammad A Mujtaba, Asif Afzal, Mohammad S Kabir and Ashraf Elfasakhany, Investigation of flexural properties of epoxy composite by utilizing graphene nanofillers and natural hemp fibre reinforcement, Polymers and Polymer Composites, Volume 30: 1–11, 2022.
  • Reddy, M.S. Prashanth, Raju, Hemadri P., Banapurmath, Nagaraj R., Meti, Vinod Kumar V., Patil, Arun Y., Influence of Nano-sized Al2O3 Reinforcements on the Mechanical Behavior of the Al7075 Composites, Micro and Nanosystems, Volume 14, Issue 1, Pages 59 – 67, March 2022.
  • M. A. Umarfarooq, P. S. Shivakumar Gouda, K. N. Bharath, G. B. Veereshkumar, N. R. Banapurmath, Abhilash Edacherian, Effects of residual stresses on interlaminar radial strength of Glass - Epoxy L-bend composite laminates, Frattura ed Integrità Strutturale, 61 (2022) 140-153; 61.10.
  • G. U. Raju, Vinod Kumar V. Meti, N. R. Banapurmath, T. M. Yunus Khan, I. G. Siddhalingeshwar, Vishal Vaikunte, Chandramouli Vadlamudi, Sanjay Krishnappa, A. M. Sajjan and Adarsh Patil, Effect of Multi-Walled Carbon Nanotubes and Carbon Fiber Reinforcements on the Mechanical and Tribological Behavior of Hybrid Mg-AZ91D Nanocomposites, Materials, MDPI Publication, 2022, 15, 6181.
  • Sandeep V. Gujjar, Nandini Nadar, Kanaram Choudhary, Anand M. Hunashyal, Kiran Shahapurkar and M. A. Mujtaba, Investigation of Various Coating Resins for Optimal Anticorrosion and Mechanical Properties of Mild Steel Surface in NaCl Solution, Advances in Materials Science and Engineering (Vol. 2022).
  • Shridhar H. Budapanahalli, Shekhar B. Mallur, Arun Y. Patil, Abeer Mohamed Alosaimi, Anish Khan, Mahmoud Ali Hussein, Abdullah M. Asiri, A Tribological Study on the Effect of Reinforcing SiC and Al2O3 in Al7075: Applications for Spur Gears, Metals 2022, 12(6), 1028;
  • K. Roopa and A. M. Hunashyal, Development and Implementation of Cement-Based Nanocomposite Sensors for Structural Health Monitoring Applications: Laboratory Investigations and Way Forward, Sustainability, September 2022, 14, 12452.
  • Sandeep V. Gujjar, Nandini Nadar, Kanaram Choudhary, Anand M. Hunashyal, Kiran Shahapurkar, M. A. Mujtaba, Mohammed Asadullah, Manzoore Elahi M. Soudagar, T. M. Yunus Khan, Khadiga Ahmed Ismail, and Ashraf Elfasakhany, Investigation of Various Coating Resins for Optimal Anticorrosion and Mechanical Properties of Mild Steel Surface in NaCl Solution, Microstructure, Properties and Tribological Behaviour of Advanced Functional Materials, Volume February 2022,
  • Umarfarooq, M.A., Gouda, P.S.S., Banapurmath, N.R., Kittur, M.I., Khan, T., Badruddin, I.A., Kamangar, S., Hussien, M. On the Residual Stresses and Fracture Toughness of Glass/Carbon Epoxy Composites, November 2022, Materials, 15 (20), art. no. 7135,
  • Suraj Revankar, N. R. Banapurmath, Ashok M. Sajjan, Vijayakumar Nimbagal, Arun Y. Patil1, R. Venkatesh, M. A. Umarfarooq, Chandramouli Vadlamudi, and Sanjay Krishnappa, Epoxy-poly lactic acid blended composites reinforced with carbon fibres for engineering applications, Materials Express, December 2022, 12(12):1502-151.
  • Choukimath, Mantesh C., Banapurmath, Nagaraj R., Riaz, Fahid. Patil, Arun Y., Jalawadi, Arun R., Mujtaba M.A., Shahapurkar, Kirand, Khan, T. M. Yunus, Alsehli, Mishal, Soudagar, Manzoore Elahi M., Fattah I.M.R., Experimental and Computational Study of Mechanical and Thermal Characteristics of h-BN and GNP Infused Polymer Composites for Elevated Temperature Applications, Materials, MDPI Journal Publication, Volume 15, Issue 15, August 2022 Article number 5397.
  • Patil A.Y., Naik A., Vakani B., Kundu R., Banapurmath N.R., Roseline M., Krishnapillai L. Mathad S.N., Next Generation Material for Denture Teeth and Denture Base Material: Limpet Teeth (LT) as an Alternative Reinforcement in Polymethylmethacrylate (PMMA), Journal of Nano- and Electronic Physics, (April 2021), Volume 13, Issue 2, Pages 02033-1 - 02033-62021.
  • Patil A., Banapurmath N.R., Hunashyal A.M., Meti V.V., Patil A.Y., Shettar A.S., Role of nano-sized graphene amine reinforcements in mechanical properties of aa7076 based mmcs, Micro and Nanosystems, Volume 13, Issue 3, Pages 284 – 291,(2021).
  • Hallad S.A., Banapurmath N.R., Yunus Khan T.M., Umarfarooq M.A., Soudagar M.E.M., Hunashyal A.M., Gujjar S.V., Yaradoddi J.S., Ganachari S.S., Elfasakhany A., Siddiqui M.I.H., Ali M.A., Statistical analysis of polymer nanocomposites for mechanical properties, Molecules, Volume 26, Issue 142, July 2021, Article number 4135.
  • Leema Rose Viannie, N.R. Banapurmath, Manzoore Elahi M. Soudagar, Anilkumar V. Nandi, Nazia Hossain, Ashwini Shellikeri, Vinita Kaulgud, MA Mujtaba, Sher Afghan Khan, Mohammad Asif, Electrical and mechanical properties of flexible multiwalled carbon nanotube/poly (dimethylsiloxane) based nanocomposite sheets, Journal of Environmental Chemical Engineering, Volume 9, Issue 6, December 2021, 106550.
  • Leena V. Hublikar, Sharanabasava V. Ganachari, Narasimha Raghavendra, Nagaraj R. Banapurmath, Veerabhadragouda B. Patil, T. M. Yunus Khan, and Irfan Anjum Badruddin, Biogenesis of silver nanoparticles and its multifunctional anti-corrosion and anticancer studies, Coatings, 2021, 11(10), 1215.
  • Vishalagoud S. Patil, Farheen Bano, R.V.Kurahatti, Arun Y. Patil, G.U.Raju, Asif Afzal, Manzoore Elahi,  M.Soudagar, Ravinder Kumar, C.Ahamed Saleel, A study of sound pressure level (SPL) inside the truck cabin for new acoustic materials: An experimental and FEA approach, Alexandria Engineering Journal, Volume 60, Issue 6, December 2021, Pages 5949-5976.
  • Shashidharagowda H., Shridhar Mathad, Shridhar Malladi, Vinod Gubbiveeranna, Kusuma C. G., Nagaraju S., Arun Y. Patil, Anish Khan, Malik Abdul Rub, Abdullah M. Asiri, Naved Azum, Sol–gel co-precipitation synthesis, anticoagulant and anti-platelet activities of copper-doped nickel manganite nanoparticles, Gels 2021, Issue 7,Volume 269,
  • H. K. Madhusudhana, M. Prasanna Kumar, Arun Y. Patil, R. Keshavamurthy, T. M. Yunus Khan, Irfan Anjum Badruddin, Sarfaraz Kamangar, Analysis of the Effect of Parameters on Fracture Toughness of Hemp Fiber Reinforced Hybrid Composites Using the ANOVA Method, Polymers 2021, 13(17), 3013.
  • Vijay Tambrallimath, R. Keshavamurthy, Saravana D. Bavan ,Arun Y. Patil, T. M. Yunus Khan, Irfan Anjum Badruddin, Sarfaraz Kamangar, Mechanical Properties of PC-ABS-Based Graphene-Reinforced Polymer Nanocomposites Fabricated by FDM Process, Polymers 2021, 13(17), 2951.
  • R. Keshavamurthy, Vijay Tambrallimath, Ali A. Rajhi, Shabbir Ahmed R. M, Arun Y. Patil, T. M. Yunus Khan, R. Makannavar, Influence of solid lubricant addition on friction and wear response of 3d printed polymer composites, Influence of Solid Lubricant Addition on Friction and Wear Response of 3D Printed Polymer Composites, Polymers 2021, 13(17), 2905..
  • Arun Y. Patil, N. R. Banapurmath, Sumukh E. P., Manojkumar V. Chitawadagi, T. M. Yunus Khan, Irfan Anjum Badruddin and Sarfaraz Kamangar, Multi-Scale Study on Mechanical Property and Strength of New Green Sand (Poly Lactic Acid) as Replacement of Fine Aggregate in Concrete Mix, Symmetry, MDPI Publication 2020, 12, 1823.
  • Arun Y. Patil, N. R. Banapurmath, Sumukh E. P. Manojkumar V. Chitawadagi, T. M. Yunus Khan, Irfan Anjum Badruddin and Sarfaraz Kamangar, Multi-scale study on mechanical property and strength of new green sand (Poly lactic acid) as replacement of fine aggregate in concrete mix, Symmetry, MDPI Publication,  2020, 12(11), 1823
  • Patil, A.Y., Banapurmath, N.R., Shivangi, U.S. Feasibility study of epoxy coated Poly Lactic Acid as a sustainable replacement for river sand. Journal of Cleaner Production Volume 267, 10 September 2020, Article number 121750.
  • Arun Y. Patil, N.R. Banapurmath, B.B. Kotturshettar, K. Lekha and M. Roseline, Limpet teeth-based polymer nanocomposite: a novel alternative biomaterial for denture base application, Fiber-Reinforced Nanocomposites: Fundamentals and Applications.
  • Arun Y. Patil, N. R. Banapurmath, Jayachandra S. Yaradoddi, B. B. Kotturshettar, Ashok S. Shettar, G. D. Basavaraj, R. Keshavamurthy, T. M. Yunus Khan, Shridhar N. Mathad, Experimental and Simulation Studies on Waste Vegetable Peels as Bio-composite Fillers for Light Duty Applications, Arabian Journal for Science and Engineering, June 2019, ISSN 2193-567X, Volume 44, Number 9, (2019) 44:7895-7907.
  • M.A. Umarfarooq, P.S. Shivakumar Gouda, G.B. Veeresh kumar, N. R. Banapurmath, Abhilash Edacherian, Impact of process induced residual stresses on interlaminar fracture toughness in carbon epoxy composites, Composites Part A, 127 (2019) 105652.
  • N. R. Banapurmath, Monisha R. Tungal, Shankar A. Hallad, Komal Swaroop Kaladagi, Nandish B. Angadi, A.S. Shettar, Tribological Studies on bearings coated with Titanium Carbo-Nitride (TiCN) using chemical vapour deposition (Cvd) Method, Journal of Applied Research and Technology, 16 (2018) 312-319.
  • Nandeesh Arali, Sanjay Hunji, A. M. Hunashyal, S. S. Quadri, Banapurmath, N. R.; Hallad, Sankar, Development of Structural Coating Material for Cement Composites Using GGBS, Multi Walled Carbon Nano Tubes and Carbon Fibers, Materials Focus, Volume 7, Number 1, February 2018.
  • Shankar A. Hallad, Nagaraj R. Banapurmath, Anand M. Hunashyal, Ashok S. Shettar, Narasimha H. Ayachit, Mruthunjaya A.K., Lohit R.B., Manjunath Uttur, “Experimental investigation for graphene and carbon fibre in polymer-based matrix for structural applications”, Journal of Applied Research and Technology, Vol. 15, pp. 297–302, 2017.
  • Shankar A. Hallad, Arun Y. Patil, N. R. Banapurmath, Anand M. Hunashyal., Ashok S. Shettar, N. H. Ayachit, Experimental and Numerical Validation on the Utilization of Polymer Based Nano-Composites for Structural Applications Using FEA Software Tool, Materials Focus, Volume 6, Number 6, December 2017, pp. 685-690(6).
  • Anand M. Hunashyal, Nagaraj .R. Banapurmath, Shankar A. Hallad , Dr.S.S.Quadri, Chetan Kulkarni, Akshay Pujar M. and Ashok S. Shettar, “Experimental Investigation on the study of Mechanical Properties and Modelling Analysis of Hybrid Composite Cement Beams Reinforced with Multi-walled Carbon Nano Tubes and Glass Fibers”,  International Journal of Applied Engineering Research,(2016) Volume11,(7), 5128-5131, ISSN:0973-4562.
  • Shankar A. Hallad, Nagaraj .R. Banapurmath, Anand M. Hunashyal, Akshay Pujar M., Chetan Kulkarni , Ashok S. Shettar  and Narasimha H. Ayachit, “Comparision Of Micro And Nano Level Reinforcments In Polymer Based Composites For Structural Applications”, International Journal of Applied Engineering Research,(2016) Volume11,(7), 5182-5187, ISSN:0973-4562.
  • Shankar A. Hallad, N. R. Banapurmath, Anand M. Hunashyal, A.S. Shettar, N.H. Ayachit, Mruthunjaya A. K., Lohit R. B., Manjunath Uttur, “Experimental and Numerical Studies on the effect of MWCNT reinforced polymer based Nano- composites using FEA software tool”, Journal of Applied Research and Technology, Ref. no: JART- D-16-00218 (2016).
  • Jayachandra Yaradoddi, Vinay Patil, Sharanabasava Ganachari, Nagaraj Banapurmath, Anand Hunashyal, Ashok Shettar, “Biodegradable Plastic Production From Fruit Waste Material And Its Sustainable Use For Green Applications”, International Journal of Pharmaceutical Research & Allied Sciences, 2016, 5(4):72-81.
  • B. Sreelekshmi, A. M. Hunashyal, S. S. Quadri, N. R. Banapurmath, Shankar A. Hallad, Sharanabasava V. Ganachari, and A. S. Shettar, “Study of Crack Filling Nano-Cement Composite Material for Structural Application”. Materials Focus, Vol. 6, pp. 1–5, 2016.
  • Shankar A. Hallad , N.R. Banapurmath , Anand M. Hunashyal , Ashok S. Shettar , Akshay Pujar M. and N.H. Ayachit, Effect of Nitriding on the Mechanical Performance of AISI 4140 Steel Using Sodium nitrite at Nano Level, Journal of Academia and Industrial Research (JAIR) Volume 4, Issue 3, August 2015,ISSN: 2278-5213.
  • Shankar A. Hallad, N. R. Banapurmath, Anand M. Hunashyal, N. H. Ayachit, Tajammul Husain, A.S.Shettar,"Experimental and Numerical investigations to study the effect of Carbon nanotubes reinforced in cement-based matrix composite beams using FEM", Universal Journal of Structural Analysis, Paper Sciences Research Publisher, (2014), Vol. 2, pp. 52-70.
  • Shankar A. Hallad, N. R. Banapurmath, Anand M. Hunashyal, N. H. Ayachit, Tajammul Husain, A.S.Shettar "Experimental investigation to study the effect of multi walled carbon nanotubes in polymer based matrix for structural applications", Universal Journal of Structural Analysis Vol. 2 (2014), pp.71-77
  • Anand Hunashyal, Nagaraj Banapurmath, Akshay Jain, Sayed Quadri, Ashok Shettar “Experimental investigation on the effect of multiwalled carbon nanotubes and nano-SiO2 addition on mechanical properties of hardened cement paste” , Advances in Materials, Science PG publication.
  • Shankar A. Hallad, Nagaraj R. Banapurmath, Anand M. Hunashyal“Experimental Investigation to study the Effect of Multi Walled Carbon Nanotubes in Polymer/Cement- Based Matrix for Structural Applications” International Journal of Science and Technolodge, (ISSN 2321 -919X) The International Journal of Science and Technoldge, Vol. 2, Issue 6, pp.415.
close
close-w
APPLY NOW apply-icon

Admission Help

icon feather phone

+91-836-2378103

close
close
phone
icon feather mail

info@kletech.ac.in

coe@kletech.ac.in (Controller of Examinations)

chat icon Chat now